Description
Kuryakyn ISO-Board Conversion Footboard: Driver or Passenger
Notes:
- Boards should not be installed in place of a footpeg on a peg mount secured with a single fastener and no anti-rotation mechanism. The board will apply too much force and loosen the mount from the bike. Passenger applications utilizing P/N 7916 requires 1" clearance from bottom of footpeg mount and exhaust. Sits 1" farther out than stock. P/N 4455 is recommended for Passenger use only; bracket design elevates board above existing peg locations about 1-1/4". P/N 7916 can be used for Driver or Passenger. Verify operation of existing shift lever and brake pedal will not be adversely affected by installation.
- Harley-Davidson: Applications for Softail & Dyna Require Anti-Rotation Mounts. Installation On Other Models In Place of a Male Mount Footpeg Requires Splined Adapter, P/N 8883
Fitment: OEM Stock Foot Peg Mount Location, Requires Model Specific Splined Adapter (Sold Separately)
Install footboards in place of a footpeg! This kit include finely chromed ISO-Boards and a cast bracket to connect the board to the slip-resistant splined adapter (sold separately).
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.