Description
California Heat 12V Battery Harness
Note: All heated clothing must be operated using the specified temperature controller. Failure to do so will result in unregulated, high temperature output that could cause skin burns. Do not leave heated clothing plugged in while unattended.
The Battery Harness is used to power your heated gear. It connects to any 12V battery for use on motorcycles, ATV’s, snow mobiles, etc. The battery harness has an inline fuse holder on the positive (red) lead, with a 15 amp fuse included. With a 38” length, there’s ample enough wire for an easy install.
Features:
- 38” length
- 15 amp fuse included
- Max capacity 15 amps
- To calculate your true amp draw, divide the amp draw on all items you are going to connect by 12, then multiply by your motorcycle volt output.
- Gloves pull 2.4 amps
- Socks pull 2.2 amps
- Jacket pulls 6.4 amps
- Pants pull 4.6 amps
- Connect the red lead to the positive terminal on your battery and the black lead to the negative. Ziptie the coax plug, leaving about 6” of slack, under your seat on the left side. You may also plug the battery harness into a panel mount port (sold separately).
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
