Description
Woodcraft Keyswitch Eliminator - Yamaha R1/R6/R6S - 43-0400
Note: The immobilizer is located in the housing mounted on top of the ignition switch by 2 torx fasteners. Remove the torx fasteners from the immobilizer sensor housing to separate it from the ignition switch. 2. Insert the key into the sensor. Secure the key in place- using electrical tape or similar. The immobilizer can now be reconnected and installed on the motorcycle. 5. The key switch elimination harness can now be installed. The smaller 2 pin connector with the 2 blue wires will not be plugged in for models with an immobilizer.
Note: These are designed for US bikes. If you live outside the US or bought your bike outside the US you may have fitment issues.
- Remove your stock ignition switch saving weight where it counts - up high!
- Removing it is great to free up space for steering dampers and lap timers.
- Fully plug and play! Installs in seconds and requires no modifications to your stock harness. This means easy reinstallation of your stock components down the road.
- For racing use only.
- Resistor is built into the harness
Fitment:
- 02-06 R1
- 03-16 R6
- 06-09 R6S
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
