Description
S&S Cycle Easy Start Chain Drive Kit: 06-16 Harley-Davidson Big Twin Models - .583 Inches
Fitment:
- 07-16 Harley-Davidson Big Twin Models
- 2006 Harley-Davidson Dyna Models
S&S .583 inch lift cam is optimized for use in the Softail® Dyna® lines. This cam makes horsepower and torque that you can feel all the way through the rpm range, making the most power right where you need it: 1500–5000 rpm.
S&S Chain Drive Easy Start Cams are a great way to increase performance at an affordable price, are installed in a short period or time reusing many stock components, and Easy Start Cams allow stock starter to start any engine. Can be used with stock valve springs.
583CE Cam kit includes cams, gearcover gasket, cam bearings, and instructions.
Features:
- Start any engine regardless of displacement or compression ratio with a stock starter
- Save your starter and battery; tested for 10,000 starts without running battery down
- Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance
- All chain-drive cams include installation kit
- All gear-drive cams include 4-gear set and installation kit
- For 88/95/96/103 cubic-inch engines
- Compression ratios below 10:1
- Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.
- Due to the inherent characteristics of gear drives, you may experience more valve train noise.
- Not for models with OEM compression releases.
- Made in the U.S.A.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
